Nissan 100NX N14 silhouetteN14

Oil Pan - Installation (Cont'd)

EM-21prose procedure
Continued from EM-20

Installation (Cont'd)

  1. 3
    Apply liquid gasket to inner sealing surface as shown in figure.
    Be sure liquid gasket is 3.5 to 4.5 mm (0.138 to 0.177 in) wide.
    Attaching should be done within 5 minutes after coating.
    Cross-section of the gasket groove and bolt hole showing liquid gasket bead placement. A '7 mm (0.28 in)' dimension callout marks the offset from the bolt hole toward the inner side. Labels: 'Groove', 'Bolt hole', 'Inner side' with an arrow.
    SEM909B
  2. 4
    Install oil pan.
    Wait at least 30 minutes before refilling engine oil.
Support our work!

Search Manual

Search pages, specs, and procedures