Outer Component Parts (GA)
EM-13parts diagramApplies to GA engines except GA16DE. Separate insets for M/T vs A/T starter mounting, 'With catalyzer and E.G.R.', and 'GA14DS with catalyzer without E.G.R.'; 2WD vs 4WD intake manifold support notes.
EXCEPT FOR GA16DE
Parts DiagramFig. fig1
| Specification | Value |
|---|---|
| Distributor mounting0.64 - 0.85, 4.6 - 6.1 ft-lb | 6.3 - 8.3N·m |
| Ignition coil bracket0.93 - 1.2, 6.7 - 8.7 ft-lb | 9.1 - 11.8N·m |
| Intake manifold support2.2 - 3.0, 16 - 22 ft-lb | 22 - 29N·m |
| Carburetor / intake manifold1.6 - 2.1, 12 - 15 ft-lb | 16 - 21N·m |
| Intake manifold to head1.6 - 2.1, 12 - 15 ft-lb | 16 - 21N·m |
| Fuel pump / thermostat housing3.1 - 4.1, 22 - 30 ft-lb | 30 - 40N·m |
| Starter motor (M/T models)3.2 - 4.3, 23 - 31 ft-lb | 31 - 42N·m |
| Starter motor small bolt (A/T models)0.7 - 0.8, 5.1 - 5.8 ft-lb | 7 - 8N·m |
| Starter motor large bolt (A/T models)3.2 - 4.3, 23 - 31 ft-lb | 31 - 42N·m |
| Starter motor (A/T models)3.1 - 4.1, 22 - 30 ft-lb | 30 - 40N·m |
| Oil pressure switch0.64 - 0.85, 4.6 - 6.1 ft-lb | 6.3 - 8.3N·m |
| Water pump0.64 - 0.85, 4.6 - 6.1 ft-lb | 6.3 - 8.3N·m |
Distributor mounting0.64 - 0.85, 4.6 - 6.1 ft-lb
6.3 - 8.3N·m
Ignition coil bracket0.93 - 1.2, 6.7 - 8.7 ft-lb
9.1 - 11.8N·m
Intake manifold support2.2 - 3.0, 16 - 22 ft-lb
22 - 29N·m
Carburetor / intake manifold1.6 - 2.1, 12 - 15 ft-lb
16 - 21N·m
Intake manifold to head1.6 - 2.1, 12 - 15 ft-lb
16 - 21N·m
Fuel pump / thermostat housing3.1 - 4.1, 22 - 30 ft-lb
30 - 40N·m
Starter motor (M/T models)3.2 - 4.3, 23 - 31 ft-lb
31 - 42N·m
Starter motor small bolt (A/T models)0.7 - 0.8, 5.1 - 5.8 ft-lb
7 - 8N·m
Starter motor large bolt (A/T models)3.2 - 4.3, 23 - 31 ft-lb
31 - 42N·m
Starter motor (A/T models)3.1 - 4.1, 22 - 30 ft-lb
30 - 40N·m
Oil pressure switch0.64 - 0.85, 4.6 - 6.1 ft-lb
6.3 - 8.3N·m
Water pump0.64 - 0.85, 4.6 - 6.1 ft-lb
6.3 - 8.3N·m
NOTE
Apply liquid gasket where indicated.
Torque values are given as N·m (kg-m, ft-lb).