Cylinder Head - Installation (Cont'd)
EM-181prose procedureInstallation (Cont'd)
Valve clearance:
Valve clearance (Unit: mm (in))
Intake & Exhaust
COLD*0.22 (0.009)
HOT0.28 (0.011)
NOTE
*: At temperature 20°C (68°F)
IMPORTANT
Whenever valve clearances are adjusted to cold specifications, check that the clearances satisfy hot specifications and adjust again if necessary.
Installation (Cont'd)
- 8Install exhaust manifold.
- 9Install distributor. Confirm the rotor position with the No. 1 cylinder at the T.D.C. compression stroke, and then set the distributor.
SEM382D - 10Install the following parts: Rocker cover and dust covers; Water pump pulley; Crankshaft pulley and drive belts.