Diagnostic Procedure 17 — Lack of Power and Stumble
EF & EC-459flowchartDiagnostic Procedure 17 — Lack of Power and Stumble
1
CHECK FUEL PRESSURE. 1. Release fuel pressure to zero. (Refer to page EF & EC-638.) 2. Install fuel pressure gauge and check fuel pressure. At idle: Approx. 245 kPa (2.45 bar, 2.5 kg/cm2, 36 psi). A few seconds after ignition switch is turned from OFF to ON: Approx. 294 kPa (2.94 bar, 3.0 kg/cm2, 43 psi)
N.G.
Check fuel pressure regulator diaphragm.
O.K.
2
CHECK FOR INTAKE AIR LEAK. When pinching blow-by hose (lowering the blow-by air supply), does the engine speed rise?
No
INSPECTION END
Yes
3
Discover air leak location and repair.