Chassis and Body Maintenance — Drum Brake Lining, Balancing Wheels, Tire Rotation
MA-64prose procedureLining standard thickness differs: LT18C (4.0 mm) vs LT23B (4.5 mm). Tire rotation patterns differ for radial vs bias tires.
Checking Drum Brake (Cont'd)
LINING
Check for wear or damage.
| Specification | Value |
|---|---|
| Standard thicknessLT18C | 4.0mm (0.157 in) |
| Standard thicknessLT23B | 4.5mm (0.177 in) |
| Lining wear limit (Minimum thickness) | 1.5mm (0.059 in) |
Standard thicknessLT18C
4.0mm (0.157 in)
Standard thicknessLT23B
4.5mm (0.177 in)
Lining wear limit (Minimum thickness)
1.5mm (0.059 in)
TEMPORARY METHOD FOR CHECKING LINING WEAR
Remove inspection hole plug and check for lining wear.
Balancing Wheels
Adjust wheel balance using road wheel center.
| Specification | Value |
|---|---|
| Wheel balance (Maximum allowable unbalance) | Refer to S.D.S. |
Wheel balance (Maximum allowable unbalance)
Refer to S.D.S.
Tire Rotation
| Specification | Value |
|---|---|
| Wheel nuts | 98 - 118N·m (10.0 - 12.0 kg-m, 72 - 87 ft-lb) |
Wheel nuts
98 - 118N·m (10.0 - 12.0 kg-m, 72 - 87 ft-lb)
T-TYPE SPARE TIRE
Do not include the T-type spare tire when rotating the tires.
| Specification | Value |
|---|---|
| Wheel nuts | 98 - 118N·m (10.0 - 12.0 kg-m, 72 - 87 ft-lb) |
Wheel nuts
98 - 118N·m (10.0 - 12.0 kg-m, 72 - 87 ft-lb)
See also
S.D.S.