EXHAUST SYSTEM

FE-10parts diagram

Exhaust system diagram is for 2WD models without catalytic converter, CD17 engine models. (Manual cover lists CD20; this page references CD17.)

Continued from FE-9

CAUTION

• Always replace exhaust gaskets with new ones when reassembling. If gasket is left on flange surface, scrape off completely as shown at left. • With engine running, check all tube connections for exhaust gas leaks, and entire system for unusual noises. • After installation, check to ensure that mounting brackets and mounting insulators are free from undue stress. If any of the above parts are not installed properly, excessive noise or vibration may be transmitted to the vehicle body.

Parts DiagramFig. SFE152A

Part Name	Notes
Front exhaust tube to manifold flange	Torque 43 - 55 N·m (4.4 - 5.6 kg-m, 32 - 41 ft-lb)
Front tube flange	Torque 43 - 50 N·m (4.4 - 5.1 kg-m, 32 - 37 ft-lb)
Mounting bracket / hanger bolts	Torque 13 - 16 N·m (1.3 - 1.6 kg-m, 9 - 12 ft-lb)
Muffler / center tube clamp	Torque 30 - 39 N·m (3.1 - 4.0 kg-m, 22 - 29 ft-lb)
Rear tube/hanger	Torque 21 - 26 N·m (2.1 - 2.7 kg-m, 15 - 20 ft-lb)
Gasket	Replace (3 locations at flange joints)

Support our work!

EXHAUST SYSTEM

Search Manual